Office furniture file cabinets – Most home offices cannot survive without a filing cabinet. Although you can choose to buy a filing cabinet in an office supply store or department store, designing and building your own can be a fun and rewarding challenge if you are handy with tools. In addition, construction of a filing cabinet at home allows infinite customization and saves you money.
Design plans for the office furniture file cabinets. Take measures occupy cabinet space and draw plans around them. File folders come in different sizes, so measure the files used in the office to decide on the height and width of each drawer. Cut the sides, top and bottom of the plywood box three quarters of an inch with a circular saw. Run a bead of wood glue through the lower edge of the walls and stick to the bottom. Key instead, and then repeat with the top. Run a bead of wood glue on the edges of file cabinet again and then nailed in place. Allow the wood glue to dry completely. Cut the bottoms, sides, fronts and backs of the drawers of half – inch plywood with a circular saw.
Fit drawers so that the sides and back of the drawer attached on top of drawer bottom. Install the drawer guides inside the cabinet and drawer body sides. Set the guides to the wood with wood screws. Start with the bottom drawer and hanging drawers one at a time. As each is installed, place the drawer inside the office furniture file cabinets and blink a few times to make sure it is in the correct position. Place the racks hanging file drawers inside.