Gas Lanterns of the Steel Plate

May 20th

Projecting gas lanterns while more traditional lanterns are still popular with some users, utility, comfort and shape is the primary goal of today’s design engineers. You should consider the weight associated with the Lantern carrying; It is important for the climbers and campers. The standard for other applications, engineers use a higher value for steel. The mantle also has undergone a change of shape, size and material.

Productions of steel parts start of iron ore melting furnace with coke in the liquid steel. After the cold steel, passing between the high rollers to form letters. These letters are now moved part of the construction of the unit. Use the appropriate metal presses to form different parts of the gas lanterns of the steel plate. Multi step manual control to move steel from press releases may require, as the process of its creation is not fully mechanized.

Color display parts you can use “e-dip” popular, but expensive to provide your selected color gas lanterns. Thoroughly clean all parts of the steel, and then place on the conveyor belts. The subject of each section for an electric charge, as it shall be determined by the thickness of the coating after the process of coloring and even produce a layer. Baked dry each section after you apply the primer, paint and coat the dips. An inexpensive alternative is enameled steel parts that use automatic sprinklers color process, in which static electricity attracts cats into the air while minimizing toxins and over spray.

Related :   Lantern Floor Lamp Decorative Effect